For the lower inner forestay fitting, I chose Selden’s “O” fitting which was marginally easier to install. The backing plates for the running backstay " T" fittings are also by Selden.
Nicholas
Mast Refit (part 2)
-
patentnick
- Posts: 57
- Joined: Tue Oct 23, 2012 11:51 am
Mast Refit (part 2)
- Attachments
-
- Selden's "O" forestay fitting accepts eye terminals or toggles.
- Screen Shot 2018-03-01 at 10.14.32.png (196.3 KiB) Viewed 53503 times
-
- The front plate serves as a template for marking and drilling.
- IMG_0495.jpg (135.42 KiB) Viewed 53503 times
-
- Coating the hole edges with Duralac.
- IMG_0497 (1).jpg (151.88 KiB) Viewed 53503 times
-
- Lower inner forestay fitting in place.
- IMG_0513.jpg (130.29 KiB) Viewed 53503 times
-
- Selden's backing plates for the running backstays accept the company's T terminals.
- Screen Shot 2018-03-01 at 10.15.29.png (164.34 KiB) Viewed 53503 times
-
- Starting to drill the 30mm holes with a holesaw.
- IMG_0493.jpg (128.78 KiB) Viewed 53503 times
-
- Backing plates riveted in place.
- IMG_0496.jpg (142.41 KiB) Viewed 53503 times
Nicholas Koligiannis
Moments of Clarity
Hull No. 334
Moments of Clarity
Hull No. 334